Seagate ST9300553SS Savvio 15K.1 SAS Product Manual - Page 31
Conducted noise immunity, Power sequencing, Current profiles
View all Seagate ST9300553SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
6.2.1 Conducted noise immunity Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector. +5V +12V = 250 mV pp from 0 to 100 kHz to 20 MHz. = 800 mV pp from 100 0Hz to 8 KHz. 450 mV pp from 8 KHz to 20 KHz. 250 mV pp from 20 KHz to 5 MHz. 6.2.2 Power sequencing The drive does not require power sequencing. The drive protects against inadvertent writing during power-up and down. 6.2.3 Current profiles Typical +12V and +5V current profiles are shown below . Note: All times and currents are typical. See Tables 2 and 3 for maximum current requirements. Figure 1. Typical ST973451SS current profile Savvio 15K SAS Product Manual, Rev. C 25