Seagate ST9320320AS Momentus 5400.5 SATA Product Manual - Page 13
Formatted capacity, Default logical geometry - momentus 5400 5
UPC - 890552607464
View all Seagate ST9320320AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 1: Drive specifications Drive specification Warranty Supports Hotplug operation per Serial ATA Revision 2.6 specification ST9160310AS ST9120310AS ST980310AS ST9320320AS ST9250320AS ST9200321AS ST9160310ASG ST9120310ASG ST980310ASG 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. Yes (requires COMPRESET from host after a hotplug event) *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 2.2 Formatted capacity Model ST9320320AS ST9250320AS ST9200321AS ST9160310AS and ST9160310ASG ST9120310AS and ST9120310ASG ST980310AS and ST980310ASG Formatted capacity* 320 Gbytes 250 Gbytes 200 Gbytes 160 Gbytes 120 Gbytes 80 Gbytes Guaranteed sectors 625,142,448 488,397,168 390,721,968 312,581,808 234,441,648 156,301,488 Bytes per sector 512 512 512 512 512 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 2.3 Default logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. Momentus 5400.5 SATA Product Manual, Rev. B 5