Seagate ST9500325AS Momentus 5400.6 SATA Product Manual - Page 21

Momentus 5400.6 SATA Product Manual, Rev. E

15

2.10.5

Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive

mounting screws. Shock may be applied in the X, Y or Z axis.

Note.

Additional shock protection is provided by the Free Fall Protection feature on ST9500325ASG,

ST9320325ASG, ST9250315ASG, ST9160314ASG, ST9120315ASG and ST980313ASG models.

See Section 2.13.1 for additional information about this feature.

2.10.5.1

Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum

operating shock of 350 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more

than two times per second.

2.10.5.2

Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation

in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse

of 2 msec duration.


in performance when subsequently put into operation is 1,000 Gs based on a nonrepetitive half-sine shock

pulse of 1 msec duration.


in performance when subsequently put into operation is 600 Gs based on a nonrepetitive half-sine shock pulse

of 0.5 msec duration.

2.10.6

Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the

drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.10.6.1

Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci-

fied in this document are specified below.

2.10.6.2

Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degrada-

tion in performance when subsequently put into operation are specified below

.

5–500 Hz

1.0 Gs (0 to peak). Max displacement may apply below 10 Hz.

5–500 Hz:

5.0 Gs (0 to peak). Max displacement may apply below 22 Hz.

Section	Page
1.0 Introduction	7
1.1 About the Serial ATA interface	8
2.0 Drive specifications	9
2.1 Specification summary table	9
2.2 Formatted capacity	14
2.2.1 LBA mode	15
2.3 Default logical geometry	15
2.4 Physical organization	15
2.5 Recording and interface technology	15
2.6 Physical characteristics	16
2.7 Seek time	16
2.8 Start/stop times	16
2.9 Power specifications	17
2.9.1 Power consumption	17
2.9.1.1 Typical current profile	18
2.9.2 Deferred spinup	18
2.9.3 Conducted noise	18
2.9.4 Voltage tolerance	18
2.9.5 Power-management modes	19
2.10 Environmental specifications	20
2.10.1 Ambient temperature	20
2.10.2 Temperature gradient	20
2.10.3 Humidity	20
2.10.3.1 Relative humidity	20
2.10.3.2 Wet bulb temperature	20
2.10.4 Altitude	20
2.10.5 Shock	21
2.10.5.1 Operating shock	21
2.10.5.2 Nonoperating shock	21
2.10.6 Vibration	21
2.10.6.1 Operating vibration	21
2.10.6.2 Nonoperating vibration	21
2.11 Acoustics	22
2.12 Electromagnetic immunity	22
2.13 Reliability	23
2.13.1 Free Fall Protection feature	23
2.14 Agency certification	24
2.14.1 Safety certification	24
2.14.2 Electromagnetic compatibility	24
2.14.3 FCC verification	25
2.15 Environmental protection	26
2.15.1 European Union Restriction of Hazardous Substances (RoHS)	26
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive	26
2.16 Corrosive environment	26
3.0 Configuring and mounting the drive	27
3.1 Handling and static-discharge precautions	27
3.2 Configuring the drive	28
3.3 Serial ATA cables and connectors	28
3.4 Drive mounting	29
4.0 Serial ATA (SATA) interface	31
4.1 Hot-Plug compatibility	31
4.2 Serial ATA device plug connector pin definitions	31
4.3 Supported ATA commands	33
4.3.1 Identify Device command	35
4.3.2 Set Features command	39
4.3.3 S.M.A.R.T. commands	40
5.0 Seagate Technology support services	41
Index	43
A	43
B	43
C	43
D	43
E	43
F	43
G	43
H	44
I	44
K	44
L	44
M	44
N	44
O	44
P	44
Q	44
R	44
S	45
T	45
U	45
V	45

Seagate ST9500325AS Momentus 5400.6 SATA Product Manual - Page 21

Shock, 10.5.1, Operating shock, 10.5.2, Nonoperating shock, Vibration, 10.6.1, Operating vibration,

Page 21 highlights