Seagate ST9900805SS Savvio 10K.1 FC Product Manual - Page 60
Y = Yes. Command is supported.
View all Seagate ST9900805SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Table 15: Supported commands (continued) Command code Supported [4] Command name 80h N XD write extended 81h N Rebuild 82h N Regenerate 83-8Fh N Not used A0h Y Report LUNS C0-DFh N Not used EO-FFh N Not used [1] Savvio drives can format to any multiple of four bytes per logical block in the range 512 to 528 bytes. [2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 54 Savvio FC Product Manual, Rev. D
54
Savvio FC Product Manual, Rev. D
[1]
Savvio drives can format to any multiple of four bytes per logical block in the range 512 to 528 bytes.
[2]
Warning.
Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3]
Reference Mode Sense command 1Ah for mode pages supported.
[4]
Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
80h
N
XD write extended
81h
N
Rebuild
82h
N
Regenerate
83-8Fh
N
Not used
A0h
Y
Report LUNS
C0-DFh
N
Not used
EO-FFh
N
Not used
Table 15:
Supported commands
(continued)
Command code
Supported [4]
Command name