Seagate ST9900805SS Savvio 10K.1 FC Product Manual - Page 67
FC-AL SCA device connector dimensions, Table 21, Part description, Positions, Part number
View all Seagate ST9900805SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
9.5.2 Connector requirements Table 21: Recommended mating SCA part numbers Part description AMP Vertical (SCA sequence) Berg Methode Molex Positions 40 40 40 40 Part number 787317-1 71781 512-220-91-101N 717431040 Features With polarization With polarization With polarization With polarization The FC-AL SCA device connector is illustrated in Figure 16. Pin 20 1.618 ± .003 in (41.1 ± 0.08 mm) Pin 1 Pin 40 .64 in (16.24 mm) 1.28 in (32.47 mm) 1.618 ± .003 in (41.10 ± 0.08 mm) Mating end 1.492 ± .009 in (37.90 ± 0.24 mm) Housing Pin 21 0.197 ± .003 in 2 places (5.00 ± .08 mm) 0.264+.007 in -.010 in (6.71+0.18 mm) (-0.25 mm) 0.226 in min. (6.50 mm) 0.394 ± .004 in (10.0 ± 0.10 mm) 0.039 in min. (0.75 mm) 0.024 in min. (0.60 mm) 0.079 ± .010 in (2.00 ± .25 mm) (initial point of contact) .05 in typ. (1.27 mm) Contact (typ.) .025 in (0.635 mm) 0.106 ± .010 in (2.70 ± 0.25 mm) 0.060 ± .010 in (1.52 ± 0.25 mm) 0.051 ± .006 in 2 places (1.30 ± 0.16 mm) Figure 16. FC-AL SCA device connector dimensions 9.5.3 Electrical description Fibre Channel drives use the FC-SCA connector for: • DC power • FC-AL interface • Drive select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External cables are not required. Savvio FC Product Manual, Rev. D 61