Seagate STM3250620A DiamondMax 20 & 21 Installation Guide - PATA - EN - Page 3

MAXTOR ATA HARD DRIVE INSTALLATION GUIDE Warranty Registration Information Before installing the hard drive, please write down the serial number and the model number information. If you ever need to contact Maxtor Support, you must provide this information about your hard drive prior to assistance. Several hard drive models are illustrated below to help you identify where these numbers are located. Use the drawing that looks like your hard drive, then locate the model and serial numbers from your hard drive and write these numbers in the space provided. Serial Number Model Number Serial Number Model Number Model Number Serial Number Model Number DiamondMax XX S/N: XXXXXXXX XXXXXXXXXX XXXXXXX XXXGB* PATA P/N: XXXXXX-XXX Firmware: X.XXX +5V x.xx A +12V x.xx A Date Code: XXXXX Site Code: XX Product of Singapore Caution. Product warranty is void if any seal or label is removed, or if the drive experiences shock in excess of 350 Gs. MIC X X X-X X X X X(X) For Technical Support and Regional Contact information, please visit www.maxtor.com Installation Summary For easy installation use MaxBlast software, available at www.maxtor.com. Use an 80-conductor Ultra ATA cable with this drive to achieve the best performance. 1. Set the jumper to Cable Select if using an Ultra ATA cable, cable position determines Master (black connector) or Slave (gray). 2. Mount the drive using two screws per side. Do not over tighten the screws. Master = ON Slave = OFF 3. Install the power and data cables. Cable select 4. Run your computer BIOS/system setup program. Select the Auto-detect option and enable Logical Block Addressing (LBA). Save and Exit the setup program. 5. Prepare the drive for use with your Operating System. See your OS instructions for details. Be careful to select the correct drive. Always backup critical data before making changes. Windows®XP or 2000 prepares the drive during installation. Windows®ME or 98 uses FDISK and Format commands. Macintosh uses Disk Utility in the utilities folder. Manufactured by Seagate Technology International 3.5 Series 7200.xx Product of xxxxx,x xxxxxx *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. R E106814 N176 D33027 Serial Number (S/N PAGE 1