Seiko 5M65 User Guide - Page 7

English 2. Turn the crown to set the 24-hour and minute hands to the current time. To set to 10:00 A.M., adjust the 24-hour hand to indicate "10" on the 24-hour scale (5 o'clock position), and the minute hand to the "0" minute position. To set to 6:00 P.M., adjust the 24-hour hand to indicate "18" on the 24-hour scale (9 o'clock position), and the minute hand to the "0" minute position. * Only the 24-hour and minute hands are to be set at this stage. The hour hand is to be set later so it is not necessary to adjust the hour hand yet, even if it is indicating the wrong time. * The date may be altered depending on the position of the hour hand, however it should not cause any concern since it can also be adjusted later. * Set the minute hand ahead of the time and then slowly turn it back to the desired time. 3. Push the crown back in simultaneously with a time signal. * The setting of the 24-hour, minute and second hands to the current time is now completed. 4. Pull out the crown to the first click. 12 5. Turn the crown to set the hour hand to the current hour. * Also, adjust the date at this point if necessary. * The moment the date changes is midnight. When set- ting the hour hand, be sure that AM/PM is set correctly. * Turn the crown slowly, checking that the hour hand moves in one-hour increments. * When adjusting the hour hand, the other hands may move slightly. However, this is not a malfunction. 6. Push the crown back in upon completion of time set- ting. How to set the 24-hour hand as a dual time indicator for a "different time zone area" 1. Pull out the crown to the second click. * Pull the crown out when the second hand is at the 12 o'clock position and the second hand will stop on the spot. * When setting the time, ensure that the watch is working: the second hand is moving at one-second intervals. Second click position 13 English