Seiko 5R65 Manual - Page 6
Tips for more accurate time setting
View all Seiko 5R65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English English 3. At the time when the second hand points to 12 o'clock (zero seconds), pull out the crown to the second click to stop the second hand. Turn the Tips for more accurate time setting crown counterclockwise (the six o'clock • Take notice of the following points in order to set the time more accurately. 6 direction) to advance the time until the watch shows the correct date. 1. Before setting the time, wind the mainspring until the power reserve indicator shows a full-wound state. 2. When using a watch after it has stopped, wait approximately 30 seconds after the second hand starts moving, and then pull the crown out to the second click. 3. Do not stop the second hand with the crown being at the second click position 4. While keeping the crown at the second click for thirty minutes or longer. If the time the crown has been at the second click position, slowly turn it counterclockwise (the position and the second hand has been stopped exceeds 30 minutes, push six o'clock direction) to advance the minute and the crown back in to its original position, and let the second hand move for hour hand to the correct time taking AM and PM 30 seconds or longer, then restart the time setting. 6 into consideration. * The date changes once every 24 hours. When setting the time, make sure that AM/PM is properly set. 5. Push the crown back in to the normal position in accordance with a time signal. Immediately, the second hand will start moving. 10 11