Seiko 5R86 User Guide - Page 5
How to set the 24-hour hand as a regular 24-hour indicator, <When the mode 1 usage is selected> - watches
View all Seiko 5R86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English English 70 75 19 80 17 85 1 95 90 How to set the 24-hour hand as a regular 24-hour indicator 2 65 2 3 1 TAC1HYMETER 50 3 30 SPRING DRIVE 20 10 6 12 9 3 6 5 9 100 13 110 120 11 130 140150 400 0 180 7 200 300 250 5 1. Pull out the crown to the second click. * Pull the crown out when the small second hand is at the 12 o'clock position and the small second hand will stop on the spot. * When setting the time, ensure that the watch is working: the mainspring is sufficiently wound. Second click position 70 400 0 2 75 19 300 250 5 80 65 2 3 1 TAC1HYMETER 50 3 SPRING DRIVE 30 20 10 6 12 9 3 6 5 9 100 13 110 120 11 130 140150 7 200 17 85 180 1 95 90 To set to 6:00 P.M., adjust the 24-hour hand to indicate "18" on the 24-hour scale (9 o'clock position), and the minute hand to the "0" minute position. 2. Turn the crown counterclockwise to set the 24-hour and minute hands to the current time. * Only the 24-hour and minute hands are to be set at this stage. The hour hand is to be set later so it is not necessary to adjust the hour hand yet, even if it is indicating the wrong time. * The date may be altered depending on the position of the hour hand, however it should not cause any concern since it can also be adjusted later. * Set the minute hand slightly behind the time you wish to set, and then slowly advance it to the desired time. 3. Push the crown back in simultaneously with the time signal. * The setting of the 24-hour, minute and small second hands to the current time is now completed. 4. Pull out the crown to the first click.