Seiko 5R86 User Guide - Page 6
How to set the 24-hour hand as a dual time indicator for a different, time zone area <when - clocks
View all Seiko 5R86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English 5. Turn the crown to set the hour hand to the current hour. * Also, adjust the date at this point if necessary. * The moment the date changes is midnight. When setting the hour hand, be sure that AM/PM is set correctly. * Turn the crown slowly, checking that the hour hand moves in one-hour increments. * When adjusting the hour hand, the other hands may move slightly. However, this is not a mal- function. 6. Push the crown back in upon completion of time setting. 70 75 How to set the 24-hour hand as a dual time indicator for a "different time zone area" 2 65 2 3 1 SPRING DRIVE TAC1HYMETER 50 3 30 20 10 6 12 9 3 6 400 0 7 200 300 250 5 1. Pull out the crown to the second click. * Pull the crown out when the small second hand is at the 12 o'clock position and the small second hand will stop on the spot. * When setting the time, ensure that the watch is working: the mainspring is sufficiently wound. 180 5 9 100 13 110 120 11 130 140150 Second click position 19 80 17 85 1 95 90 10 80 75 1 95 90 17 85 70 400 0 2 19 300 250 5 65 2 3 1 TAC1HYMETER 50 3 SPRING DRIVE 30 20 10 7 12 9 3 6 5 9 100 13 110 120 11 130 140150 7 200 180 To set the 24-hour hand to the time in New York while setting the hour/minute hands to indicate the time in London. When the time in London is 10:00 A.M., it is 5:00 A.M. in New York. Set the 24-hour hand to indicate "5" on the 24-hour scale (the 2.5 o' clock position), while the minute hand is pointing at the "0" minute position. * The time difference adjustment function serves only for a time in a "different time zone area" where the time difference from the time in London is represented in one-hour increments. 2. Turn the crown counterclockwise to set the 24-hour and minute hands to the time in the "different time zone area" you wish to set. * Only the 24-hour and minute hands are to be set at this stage. The hour hand is to be set later so it is not necessary to adjust the hour hand yet, even if it is indicating the wrong time. * The date may be altered depending on the position of the hour hand, however it should not cause any concern since it can also be adjusted later. * Set the minute hand behind the time and then slowly advance it to the desired time. 3. Push the crown back in simultaneously with the time signal. * The setting of the 24-hour, minute and small second hands to the time in the " different time zone area" is now completed. 4. Pull out the crown to the first click. 11 English