Seiko S321 Manual - Page 2
SEIKO, TIMEKEEPER, rmrstIN, wcrrcoi, TIMERITHE STOPWATCH
View all Seiko S321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
•FEATURES OF SEIKO TIMEKEEPER Cal. S321 The SEIKO Timekeeper Cal. S321 is a digital timer with alarm which can be set easily for a desired amount of time with the rotary switch. It has also the stopwatch function and others useful for sports. Easy for starting the timer • All that is required to set the timer is just to turn the rotary switch to the desired minutes on the dial. With the alarm function • when the time set is over, the alarm rings for 2 seconds. • An announcing sound beeps every second from 3 sconds before the time set is over. Two different displays available • The timer can be changed over, with one touch operation, between the count-down display to show remaining time and the count-up display to show elapsed time. With the graphic display • In addition to the digital display, the timer is also displayed graphically. The graphic display by a 60-minute circle graph helps you see the elapsed or remaining time at a glance. toga sr '\''aP6 94' OBS rmrstIN -wcrrcoi;, • ( Goal shoot at 15 minutes in the first half ) ova 30 minutes remaining .23 ofrh §,„ remaini~ sec. Graphic display Digital display With the stopwatch function • Up to 60 minutes (59 minutes 59 seconds and 99/100) can be measured in 1/100 second. • Split time measurement is also available. Others • The timer can be set for any desired amount of time (other than the preset timer modes) up to 60 minutes in seconds. • The timekeeper is water resistant and is manufactured to withstand up to 3 atmospheres of pressure/bar (water pressure at a 30-meter or 100-foot depth). • Operation confirmation sound "PiP" can be heard whenever pushing the buttons. •HOW TO USE THE TIMERITHE STOPWATCH Display and button operation Timer Reset Stopwatch Split/Split release/Seconds zero reset Setting the timer for other than the preset timer modes (up to 60 minutes in seconds) Display off position for power saving (Turn the rotary switch to this position when not in use.) on Button B: A: 5,10 • 15,2%,,, • al/ l• on .40 Rotary switch Timer/Stopwatch Start/Stop Button C: Timer Count - down display/ Count-up display changeover Refer to page 5 for details. Preset timer modes (1 -45 min.) Stopwatch mode position How to use: Turn the rotary switch to the desired preset timer mode. ("OFF" is the position where the display is turned off for power saving. The timer/stopwatch is also reset there. For explanations of "*SET" and "*", refer •HOW TO USE THE TIMER FOR OTHER THAN THE PRESET TIMER MODES.) Li Depress button "A" to start and stop the timer/stopwatch. (Start and stop can be repeated as many times as necessary.) El Depress button "B" to reset the timer/stopwatch. (When the stopwatch is stopped in procedure 2, the digits are reset to "00" by depressing button "B".) Also depress button "B" to measure a split time and to make split release. (Split and split release can be repeated as many times as necessary when making a stopwatch measurement.) For an effective use of split time measurement, refer to INEFFECTIVE WAY OF USE