Seiko V172 Manual - Page 13

English 45 50 20 IMPROPER FUNCTION When an abnormal display appears, follow the procedures below to reset the builtin IC. The watch will resume its normal operation. 1. Pull out the crown to the second 60 click. 55 05 A 60 2. Keep pressing down Button A and B for 3 seconds or longer. 45 15 MIN. 30 60 3. Push the crown ba c k into the 30 normal position and check if the 12 small second hand moves as normal. 9 3 ALARM 6 35 25 B 30 CROWN • Resetting the IC will initialize the watch. Before starting to use the watch, it will be necessary to set the time and adjust the STOPWATCH hands to the "0" position. Refer to "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION" section of this manual. 24 English 15 10 40 ROTATING BEZEL (for models with rotating bezel) l The rotating bezel can show up to 60 minutes of elapsed time. 1 Turn the rotating bezel to align its " " mark with the minute hand. 2 Read the number on the rotating bezel that the minute hand points to. Start Elapsed time 30 minutes have elapsed. Note: For some models, the rotating bezel rotates only counterclockwise. 25