Seiko V172 Manual - Page 5

English 15 10 40 15 10 40 English SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION l This watch is designed so that the following adjustments are made with the crown at the second click position: 1) main time setting 2) alarm hand adjustment 3) stopwatch hand position adjustment Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the same time. If needed, 3) should also be adjusted then. CROWN Pull out to the second click when the second hand is at the 12 o'clock position. 1. MAIN TIME SETTING Hour hand Minute hand 60 55 05 CROWN Turn to set the hour and minute hands. 60 30 45 50 20 Small second 35 25 hand 30 8 1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to "0." 2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn to indicate the current time. 3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand position if necessary. 4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch designed so that the date changes once in 24 hours. 5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. 2. ALARM HAND ADJUSTMENT Hour hand Minute hand 60 55 05 45 50 20 60 30 12 9 3 ALARM 6 B 35 25 30 ALARM hour hand ALARM minute hand I Set the ALARM hands to the time the main time hands indicate. B Press repeatedly to set the ALARM hands to the time indicated by the main time hands. The ALARM hands move quickly if Button B is kept pressed. 9