Sennheiser ASA 3000 Instructions for Use - Page 8
To remove the input modules - screwdriver
View all Sennheiser ASA 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
¶ º¶ When using the selective input modules: y Make sure that all transmitters and receivers of your transmission system operate within the frequency window of the selective input modules! When using the wideband input modules: y Use an active antenna (e.g. A 12 AD antenna) or an antenna with antenna booster (e.g. GZA 1036 antenna with AB 1036 antenna booster). To exchange the input modules: ̈ Use a crosstip screwdriver to loosen the screw of the catch for the input modules ¶. ̈ To remove the input modules ² and º, plug a BNC connector into the input modules' BNC sockets and pull hard (!) at the BNC connector. ̈ Insert the new input modules and tighten the screw of ² the catch ¶. 8
8
When using the selective input modules:
y
Make sure that all transmitters and receivers of your
transmission system operate within the frequency win-
dow of the selective input modules!
When using the wideband input modules:
y
Use an active antenna (e.g. A 12 AD antenna) or an
antenna with antenna booster (e.g. GZA 1036 antenna
with AB 1036 antenna booster).
To exchange the input modules:
±
Use a crosstip screwdriver to loosen the screw of the
catch for the input modules
·
.
±
To remove the input modules
¶
and
¸
, plug a BNC con-
nector into the input modules‘ BNC sockets and pull hard
(!) at the BNC connector.
±
Insert the new input modules and tighten the screw of
the catch
·
.
·
¶
¸
·