Sennheiser EZX 60 Instruction for use - Page 14
Switching the headset off, Pairing the headset, device each time - bluetooth headset manual
View all Sennheiser EZX 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Putting the EZX 60 into operation If a certain Bluetooth connection cannot be established, because the corresponding Bluetooth device is switched off or out of range, you can manually re-establish the connection as follows: ̈ Switch off the Bluetooth visibility of all Bluetooth devices in the vicinity, except for the Bluetooth device you want to connect to. ̈ Press the multi-function button ³. The LED ¿ flashes once every 5 seconds, indicating that the headset is in searching mode. When the headset and the Bluetooth device detect each other, the connection is established. The LED ¿ flashes 3 times and a high confirmation beep is heard in the headset. The headset saves up to 8 Bluetooth connection profiles of Bluetooth devices with which it has been paired. If you want to re-establish a connection with a device with which the headset has been paired, the connection needs to be established from this device (for details, refer to the manual of the Bluetooth device). Before doing so, make sure that the last paired device is disconnected. Switching the headset off The headset switches off automatically 1 hour after the last Bluetooth connection has ended (standby mode). To manually switch the headset off: ̈ Press and hold the multi-function button ³ for 5 seconds. 5 s A descending confirmation beep is heard in the headset and the LED ¿ flashes 3 times, indicating that the headset switches off. Pairing and volume settings are saved automatically when the headset is switched off. ᕡ ¿ Pairing the headset You can pair the headset to up to 8 Bluetooth compliant devices. These Bluetooth devices (mobile phones or similar devices) must support the "hands free profile" (HFP) or "headset profile" (HSP). Once you have paired the headset to a Bluetooth device, the headset automatically connects to the last paired Bluetooth device each time this device and the headset detect each other. Pairing to a mobile phone Before pairing to a mobile phone, make sure: • that the headset's battery has been charged as described under "Charging the headset battery" on page 10, • that your mobile phone is switched on and Bluetooth visibility is enabled, • that the headset is switched off and placed close to the mobile phone (approx. 20 cm or 7"). 12