Sennheiser EZX 60 Instruction for use - Page 20

Using the EZX 60 ºᕧ ºᕧ Changing the speaker volume WARNING Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing. Sennheiser headsets also sound exceptionally good at low volumes. ̈ Set the volume to a medium level. You can only adjust the speaker volume during an active call: ̈ To increase the volume step-by-step, press the volume up button º. ̈ To reduce the volume step-by-step, press the volume down button ¶. ̈ To change the volume continuously, press and hold the respective volume button. The speaker volume can be adjusted in 8 steps. The volume is factory preset to a medium level. When the minimum or maximum volume is reached, a high or low beep is heard in the headset. When you switch off the headset, the current volume setting is saved. Depending on your mobile phone you can also change the speaker volume using your mobile phone (see the manual of the respective mobile phone). Changing the ring tone volume* You can adjust the ring tone volume while the headset is in standby mode (no active call): ̈ To increase the volume step-by-step, press the Volume up button º. ̈ To reduce the volume step-by-step, press the Volume down button ¶. ̈ To change the volume continuously, press and hold the respective volume button. The ring tone volume can be adjusted in 8 steps. The volume is factory preset to a medium level. When the minimum or maximum volume is reached, a high or low beep is heard in the headset. When you switch off the headset, the current volume setting is saved. * This function must be supported by the mobile phone. 18