Sennheiser MOMENTUM True Wireless Instruction manual MOMENTUM True Wireless - Page 15

Using the earphones If no connection is established within 1 minute, pairing mode is terminated and the earbuds switch to idle mode. If necessary, repeat the pairing procedure. Disconnecting the earphones from a Bluetooth device ▷ Via the menu of your Bluetooth device, disconnect the connection to the earphones. The earphones are disconnected from the Bluetooth device. The earphones then search for other paired devices. If no device is found, you hear the voice prompt "No connection". The earphones go to idle mode. If you want to clear the Bluetooth pairing list of the earphones, reset the earphones to the factory default settings (> 29). Installing the Smart Control app To make full use of all the settings and functions of the earphones, you need to have the free Sennheiser Smart Control app installed on your smartphone. Download the app from the App Store or Google Play and install it on your smartphone. Alternatively, you can use your smartphone to scan the following QR code or to call up the following Internet site: www.sennheiser.com/device-control-app ▷ Connect your smartphone to the earphones using Bluetooth (> 13). ▷ Start the Smart Control app. The Smart Control app recognizes the earphones and activates all available settings and functions. MOMENTUM True Wireless | 15