Sennheiser SKP 500 G4 Instruction manual ew 500 P G4 PDF - Page 123
Synchronizing devices
![]() |
View all Sennheiser SKP 500 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Synchronizing devices Synchronizing devices You can synchronize ew 500 P G4 series transmitters and receivers via the receiver's infrared interface. You can adjust the Parameters to be transferred to the transmitter here: "Advanced -> Sync Settings menu item" To synchronize the devices: ▷ Switch the transmitter and the receiver on. ▷ Call up the Sync menu item on the receiver. Sync appears in the receiver's display. ▷ Hold the infra-red interface of the transmitter in front of the infra-red interface of the receiver. The parameters are transferred to the transmitter. When the transfer is complete, a tick appears in the receiver's display as a confirmation. Then the receiver will return to the current standard display. ► To cancel synchronization: ▷ Press the ON/OFF button on the receiver. An X appears in the display. This icon also appears when: • no transmitter is found or the transmitter is not compatible. • no transmitter is found and the synchronization process automatically ends after 30 seconds. 122
![](/manual_guide/products/sennheiser-ew-500-film-g4-instruction-manual-ew-500-p-g4-pdf-b1c51bf/123.png)