Sennheiser Set 900 Instructions for use - Page 10
Putting the Set 900 into operation, Setting up the transmitter - tv
View all Sennheiser Set 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Putting the Set 900 into operation Putting the Set 900 into operation Setting up the transmitter ̈ Place the transmitter so that: - there are no obstacles in the light path between transmitter and receiver and - transmitter and receiver are not exposed to direct sunlight. Direct sunlight may interfere with the reception and may damage the transmitter. If you are using a plasma TV screen: Plasma TV screens radiate an infra-red signal that can adversely affect the transmission quality. ̈ Make sure that the transmitter is placed as far as possible from your plasma TV screen. ̈ If necessary, use a standard extension cable (3.5 mm stereo jack plug) to reduce the distance between transmitter and receiver. This extension cable is available from your Sennheiser dealer. Note: One transmitter can be used to transmit to several receivers on the same frequency. 6