Sennheiser Set 900 Instructions for use - Page 33

Particularities of operating mode 2, Pull the battery out of the receiver's battery

Page 33 highlights

Additional technical information Particularities of operating mode 2: In operating mode 2, the transmitter is not switched on by the sound signal from the sound source. To switch the transmitter on: ̈ Take the receiver out of the charging compartment. To switch the transmitter off: ̈ Place the receiver into the charging compartment. If - in operating mode 2 - you want to use a second receiver and charge its rechargeable battery during operation: ̈ Pull the battery out of the receiver's battery compartment 8. ̈ Insert the battery into the charging compartment 0 at the side of the trans- mitter (see "Removing and charging the receiver's battery" on page 18). 8 ̈ Slide the battery into the transmitter's charging compartment 0 as far as it will go. 0 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

29
Additional technical information
Particularities of operating mode 2:
In operating mode 2, the transmitter is
not
switched on by the sound
signal from the sound source.
To
switch
the transmitter
on
:
±
Take the receiver out of the charging compartment.
To
switch
the transmitter
off
:
±
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
±
Pull the battery out of the receiver’s battery
compartment
8
.
±
Insert
the
battery
into
the
charging
compartment
0
at the side of the trans-
mitter (see “Removing and charging the
receiver’s battery” on page 18).
±
Slide the battery into the transmitter’s
charging compartment
0
as far as it will go.
8
0