Sharp 340L UX-340L Operation Manual - Page 40
Registering through OpenLCR's Web site - instructions
UPC - 074000032781
View all Sharp 340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setting Up and Using OpenLCR 4 Follow the instructions you hear. ♦ Note: If you are on a pulse dial line, press the * key before pressing the number keys to respond. (This makes your fax temporarily issue tone signals when you press the number keys.) ♦ When registration is completed, your fax machine will receive the rate data from OpenLCR. This will last one or two minutes. When downloading is completed, the display will briefly show DOWNLOAD OK!! and then revert to the date and time. ♦ OpenLCR will also program the date and time and your fax number in your fax machine. Registering through OpenLCR's Web site You can also register at OpenLCR's Web site, www.OpenLCR.com. After registering you will need to receive the rate data manually (service is not activated until your fax receives the rate data). See Downloading (receiving) the rate data manually on the following page. If you move, you must re-register! The rate data that you receive is based on the address you provide when registering with OpenLCR. If you move, the rate data will not be correct for your new location. In this case, repeat the registration procedure to give OpenLCR your new address. Note: If you wish to connect more than one OpenLCR-enabled device to the same line, please call OpenLCR at 970-206-1207. 38