Sharp 340L UX-340L Operation Manual - Page 44
international calls will not be routed by OpenLCR. However,
UPC - 074000032781
View all Sharp 340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Setting Up and Using OpenLCR The following table shows marks related to OpenLCR that may appear in the display. Mark Meaning OpenLCR has been activated and is ready for use. (Blinking) OpenLCR cannot be used because the rate data has been erased. Your fax will automatically call OpenLCR within the next 24 hours to receive new data, or you can download the data manually if you need to use OpenLCR immediately. See Downloading (receiving) the rate data manually on page 39. The rate data in the fax is no longer correct and the fax cannot connect to OpenLCR to obtain new data. See What to do if "E" appears in the display on page 45. OpenLCR has been temporarily turned off. See Temporarily turning off OpenLCR below. Rate data was not yet available when your fax called OpenLCR. Your fax will automatically call OpenLCR again when the rate data is available. Until that time, long distance calls will be routed through your primary carrier. (Blinking) Your fax will automatically call OpenLCR within the next 24 hours to learn when correct rate data will be available. Temporarily turning off OpenLCR If needed, you can temporarily turn off OpenLCR. ♦ When you temporarily turn off OpenLCR, long distance and international calls will not be routed by OpenLCR. However, the fax machine will still call OpenLCR periodically to receive updated rate data. 42