Sharp 37D6U Service Manual - Page 13
RS-232C port specifications - problems
UPC - 074000362987
View all Sharp 37D6U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LC-26D6U LC-32D6U LC-37D6U 13 Appendix RS-232C port specifications PC Control of the TV When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. NOTE This operation system should be used by a person who is accustomed to using computers. Communication conditions Set the RS-232C communications settings on the PC to match the TVÕs communications conditions. The TV's communications settings are as follows: Baud rate: 9,600 bps Data length: 8 bits Parity bit: None Stop bit: 1 bit Flow control: None Communication procedure Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. Command format Eight ASCII codes + CR C1 C2 C3 C4 P1 P2 P3 P4 Command 4-digits Parameter 4-digits Command 4-digits:Command. The text of four characters. Parameter 4-digits:Parameter 0 - 9, x, blank, ? Return code Parameter Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the parameter.) When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format".) Any numerical value can replace the "x" on the table. 0 0009 -3 0 100 0055 When "?" is input for some commands, the present setting value responds. ? ???? Response code format Normal response OK Return code (0DH) Problem response (communication error or incorrect command) ERR Return code (0DH) Command table Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P OWR 0 _ _ _ It shifts to standby. INPUT SELECTION A TOGGLE I T G D x _ _ _ (Toggle) It input-switches by the toggle. (It is the same as an input change key) TV INPUT1-4 I TVDx _ _ _ It input-switches to TV. (A channel remains as it is. (Last memory)) I A V D * _ _ _ Input terminal number (1_4) It input-switches to INPUT1~INPUT4. INPUT SELECTION B INPUT 1 I N P 1 0 _ _ _ AUTO An input change is also included. 1 _ _ _ VIDEO 2 _ _ _ COMPONENT INPUT 2 I N P 2 0 _ _ _ AUTO 1 _ _ _ VIDEO 2 _ _ _ COMPONENT AV MODE SELECTION A V M D 0 _ _ _ (Toggle) Although it can choose now, it is toggle operation in inside. 1 _ _ _ STANDARD 2 _ _ _ MOVIE 3 _ _ _ GAME 4 _ _ _ USER 5 _ _ _ DYNAMIC (Fixed) VOLUME POSITION 6 _ _ _ DYNAMIC V O L M * * _ _ Volume (0 _60) H-POSITION H P O S * * * _ AV mode. ( ± 10) V-POSITION V P O S * * * _ AV mode. ( ± 20) VIEWMODE W I D E 0 _ _ _ (Toggle) [AV] Although it can choose now, it is toggle operation in inside. 1 _ _ _ Side Bar [AV] 2 _ _ _ S.Stretch [AV] 3 _ _ _ Zoom [AV] 4 _ _ _ Stretch [AV] MUTE M U T E 0 _ _ _ (Toggle) 1 _ _ _ On 2 _ _ _ Off SURROUND A C S U 0 _ _ _ (Toggle) 1 _ _ _ On 2 _ _ _ Off AUDIO SELECTION A C H A x _ _ _ (Toggle) SLEEP TIMER O F T M 0 _ _ _ OFF 1 _ _ _ OFF TIMER _ 30 MIN. 2 _ _ _ OFF TIMER _ 60 MIN. 3 _ _ _ OFF TIMER _ 90 MIN. 4 _ _ _ OFF TIMER _ 120 MIN. CHANNEL DIRECT CHANNEL (ANALOG) D C C H * * * _ The channel number of TV (1 _ 125) An input change is included if it is not TV display. In Air, 2 _ 69ch is effective. In Cable, 1 _ 125ch is effective. DIRECT D A 2 P * * * * (0101-9999) DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit) CHANNEL D C 2 U * * * _ (0-999) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) (DIGITAL) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel) D C 2 L * * * _ (0-999) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel) D C 1 0 * * * * (0-9999) DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000) D C 1 1 * * * * (0-6383) DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000) CH UP C H U P x _ _ _ The channel number of TV + 1 If it is not TV display, it will input-switch to TV. (same function as CH ) CH DOWN C H D W x _ _ _ The channel number of TV - 1 If it is not TV display, it will input-switch to TV. (same function as CH ) Air/Cable SELECT A C S L 0 _ _ _ (Toggle) AIR CABLE AIR 1 _ _ _ AIR 2 _ _ _ CABLE CC C L C P x _ _ _ (Toggle) Toggle operation of a closed caption. NOTE If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. As long as that from which the parameter ( × ) in the table is a numerical value, it may write anything.