Sharp AJ-1800 AJ-Printer Interactive Operation Manual for Windows® - Page 12

"Paper" Tab Settings (part 2) Printer Properties Paper Size Select an appropriate paper size for your document from drop-down list. Paper Ledger Letter Legal Executive A3 A4 A5 B4 B5 COM10 DL C6 A6 Invitation A2 Index card 5" x 8" Index card 4" x 6" Index card 3" x 5" Japanese Hagaki Banner Letter Banner A4 Custom Size 11" x 17" 8.5" x 11" 8.5" x 14" 7.25" x 10.5" 297mm x 420mm 210mm x 297mm 148mm x 210mm 257mm x 364mm 182mm x 257mm 4.125" x 9.5" 110mm x 220mm 114mm x 162mm 105mm x 148mm 4.375" x 5.75" 5" x 8" 4" x 6" 3" x 5" 100mm x 148mm 8.5" x 11" 210mm x 297mm Min. : 3.00" x 5.00" (76.2mm x 127.0mm) Max. : 11.69" x 17.00" (297.0mm x 431.8mm) ! The document size must be smaller than the selected (loaded) paper. If not, printing will occur over the edge of the paper causing the machine to become internally dirty. ! Ledger, A3, or B4 sized paper can not be loaded in this printer. The print image should be reduced by the "Fit To Paper Size" or "Zoom[%]" setting. "N-Up Printing", "Fit To Page", and "Zoom[%]" settings are not available when you select "COM10", "DL", "C6", "Invitation A2", "Japanese Hagaki", "Banner Letter", or "Banner A4" sized paper. Paper Selection Select "Tray" or "Bypass" for your print job. Tray Paper is fed to the printer from the paper tray. If the "Tray" is selected from this tab and paper is placed in the bypass tray, the paper in the bypass tray will be fed first, and then paper will be fed from the paper tray. Bypass Paper will be fed to the printer from the bypass tray. Only one sheet can be loaded into the bypass tray. To load paper into the bypass, place the paper into the tray against the guide and press the paper button. When printing one page: Load paper into the bypass then start printing from your computer. If paper is not loaded before printing is started, the paper lamp on the printer will blink and the message "Please set a sheet of paper on bypass" will appear on the screen of the computer. When printing more than one page: Repeat as above for each page. Make sure to insert "Banner Letter" and "Banner A4" through the bypass tray. Max. 5 sheets of banner paper can be set to the bypass tray. Make sure that your application supports Banners when you intend to print onto Banners. 10 How to Use the Printer Properties Online Manual Print Print Status Window Sharing Printer Maintenance Troubleshooting