Sharp AJ-6010 AJ6010 Operation Manual - Page 78
Aligning the Print Head part 2
View all Sharp AJ-6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Aligning the Print Head (part 2) Maintenance 2 Select a pattern sample for "Pattern B". Seventeen block figures with a horizontal line on each horizontal side ( ) are printed in pattern B. Of the seventeen figures determine which block is most nearly centred between the horizontal lines and select the corresponding number. Example: -6 +8 B 6 Click the "OK" button in the "Align print head" dialog box. The print head will align itself. ! If you cannot find any satisfactory pattern sample for each of "Pattern A" to "Pattern D" settings, select the best ones among the printed pattern samples, and then go back to step 3. ! The unit cannot perform other operations while aligning the print head. -8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 3 Select pattern samples for "Pattern C" and "Pattern D" respectively. Thirteen lines are printed in pattern C and pattern D. Of the thirteen lines determine which line is the straightest and select the corresponding number. Example: Cracked line -6 C or D +1 Straight line -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 76