Sharp AL-1340 AL-1340 Operation Manual - Page 6
Main Features
![]() |
UPC - 074000074347
View all Sharp AL-1340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CAUTIONS G Place the copier on a firm, level surface. G Do not install the copier in a humid or dusty location. G When the copier is not used for long time, for example for consecutive holidays, turn the power switch off and remove the power cord from the outlet. G When moving the copier, be sure to turn the power switch off and remove the 1 power cord from the outlet. G Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the copier. G Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Getting started SAFETY PRECAUTIONS This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below. G Do not remove the cabinet, operation panel or any other covers. G The copier's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. MAIN FEATURES High-speed laser copying G Since warm-up time is zero, copying can be started immediately after the power switch is turned on. G First-copy time is only 9.6 seconds (normal mode). G Copying speed is 13 copies/min., which adapts to business use, allowing improvement of working efficiency. High-quality digital image G High-quality image copying at 600 dpi can be performed. G In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps. G The photo mode copying function allows clear copying of delicate halftone original images such as monochrome photos and color photos. 4
![](/manual_guide/products/sharp-al1340-al1340-operation-manual-efc9615/6.png)