Sharp AL 1631 AL-1631 AL-1641CS Operation Manual - Page 65
Misfeed Removal
UPC - 074000074651
View all Sharp AL 1631 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the document feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear ( ) key is pressed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF" (p.67). 1 Open the multi-bypass tray, and side cover, in that order. To open the multi-bypass tray, see "The multi-bypass tray" (p.17). To open the side cover, see "INSTALLING THE TD CARTRIDGE" (p.10). 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.64). If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.66) If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.65) If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.64) 8 63