Sharp AL 1651CS AL-1651CS AL-1661CS Operation Manual - Page 50
Click the Set the IP - network setup
UPC - 074000074590
View all Sharp AL 1651CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SET UP THE SOFTWARE 5 Double-click the "setup" icon ( ). Note If the language selection screen appears after you double click the "setup" icon, select the language that you wish to use and click the "Next" button. (Normally the correct language is selected automatically.) 6 The "SOFTWARE LICENCE" window will appear. Make sure that you understand the contents of the software licence, and then click the "Yes" button. 7 Read the "Readme First" in the "Welcome" window and then click the "Next" button. Note To set the IP address of the machine, follow the steps below. If the machine is already connected to the network and its IP address has been set, go to "LPR (TCP/IP) direct printing" (p.50). Set the IP Address This setting is only required once when using the machine on a network. 8 Click the "Set the IP Address" button. 48