Sharp AL 1651CS AL-1651CS AL-1661CS Operation Manual - Page 78
See DISPLAY MESSAGES to check - error
UPC - 074000074590
View all Sharp AL 1651CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
TROUBLESHOOTING AND MAINTENANCE Problem Cause and solution Paper size for a paper tray cannot be set. Copying or printing is performed. → Set the paper size after copying or printing is complete. The machine has stopped temporarily due to running out of paper or a misfeed. → Load paper or remove the misfeed, and then set the paper size. A copy job stops before it is finished. "MEMORY FULL, PRESS START TO RESUME." appears in the display. → The memory became full during sort. Copy only the originals that have been scanned to that point, or cancel the job and clear the data from memory. The tray is out of paper. → Load paper. The power save indicator is lit. Other indicators are lit. → If other indicators are lit, the machine is in preheat mode. Press any key on the operation panel to resume normal operation. Only the power save indicator is lit. → If only the power save indicator is lit, the machine is in auto power shut-off mode. Press the [START] key ( ) to resume normal operation. See "DISPLAY MESSAGES" to check Error indicator ( ) is the meaning of the error indicator and lit or blinking. error message in the display, and take appropriate action. Copies made using the RSPF are dirty. The underside of the RSPF is dirty → Clean the underside of the RSPF (especially areas where black lines appear). Lighting fixture flickers. The same power outlet is used for the lighting fixture and the machine. → Connect the machine to a power outlet which is not used for other electric appliances. Page - 23, 80 34 19 17 17 71 88 - 76