Sharp AL 2040CS AL-2030 AL-2040CS Operation Manual - Page 65
Misfeed Removal
UPC - 074000075153
View all Sharp AL 2040CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "E: Misfeed in the SPF" (p.67). 1 Open the multi-bypass tray, and then open the side cover. 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.64). If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.66) If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.65) If paper is misfed here, proceed If paper is misfed here, proceed to "A: 8 to "D: Misfeed in the lower Misfeed in the paper feed area". (p.64) paper feed area". (p.66) 63