Sharp AL-840 AL-800 AL-840 Operation Manual - Page 12
Removing Protective Packing Materials
UPC - 074000072954
View all Sharp AL-840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REMOVING PROTECTIVE PACKING MATERIALS 1 Remove the screw from the left side of the copier by rotating it in the direction indicated by the arrow. Remove protective material . The screw must be used if the copier has to be moved. (p.45) Store the screw inside the front cover. a b 2 Installation Do not remove with the front cover closed. 2 Remove the tape . 3 Push gently on both sides of the front cover to open the cover. 4 Store the screw which has been removed in step 1 at the right side inside the front cover. 11
11
2
Installation
REMOVING PROTECTIVE PACKING MATERIALS
1
Remove the screw from the left side of the copier by rotating it in the direction indicated
by the arrow. Remove protective material
.
The screw must be used if the copier has to be moved. (p.45) Store the screw
inside the front cover.
Do not remove with the front cover closed.
a
b
2
Remove the tape
.
3
Push gently on both sides of the front cover to open the cover.
4
Store the screw which has been removed in step 1 at the right side inside the front
cover.