Sharp AR-153E AR-153E AR-157E Operation Manual Suite - Page 34
MISFEED REMOVAL, Check the misfeed location. Remove the misfed paper - cartridge
View all Sharp AR-153E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the RSPF/SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the original feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear ( ) key is pressed. When the RSPF/SPF misfeeds an original sheet, the unit will stop and the RSPF/SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the RSPF/SPF, see "E: Misfeed in the RSPF/SPF" (p.35). If the unit is turned on with the lower side cover open, the misfeed ( ) indicator will blink. In this case, close the lower side cover. The misfeed ( ) indicator will go out. 1 Open the multi-bypass tray, and side cover, in that order. To open the multi-bypass tray, see "BYPASS FEED (including special paper)" (p.10). To open the side cover, see "TONER CARTRIDGE REPLACEMENT" (p.25). 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.33). If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.34) If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.33) If paper is misfed here, proceed to "D: Misfeed in the lower paper feed area". (p.35) If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.33) 32