Sharp AR-162 AR-162 AR-163 Operation Manual - Page 14
Use The Original Size Enter
![]() |
View all Sharp AR-162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
LOADING COPY PAPER GETTING STARTED Loading copy paper 8 To set the selected paper size, press the PAPER SIZE ENTER ( ) key. q The selected paper feed location indicator will blink and the corre- sponding paper size (which is currently set) indicator will light up steadily. All other indicators will go out. For paper size setting, ensure that the COPY mode has been selected. However, if copying, printing or facsimile printing is being performed, paper size setting cannot be made even in the COPY mode. See Note on page 47. 9 Use the TRAY SELECT ( ) key to select the paper tray of which the paper size has been changed. q Each time the TRAY SELECT ( ) key is pressed, a paper tray will be indicated with a blinking paper feed location indicator. If an optional paper feed unit is not installed, this operation is not needed. 10 Use the ORIGINAL SIZE ENTER ( the paper size which is set. ) key to select q Each time the ORIGINAL SIZE ENTER ( ) key is pressed, a paper size will be indicated with a paper size indicator. 11 Press the START ( ) key and then the PAPER SIZE ENTER ( ) key. q To change the paper size setting of another tray, repeat steps 9 to 10 after pressing the START ( ) key. 12
![](/manual_guide/products/sharp-ar162-ar162-ar163-operation-manual-e5d1ea0/14.png)