Sharp AR-C260M AR-C260 AR-C260M Operation Manual - Page 78
NORMAL COPYING, Copying from the reversing automatic document feeder, 1-sided copies of 1-sided
View all Sharp AR-C260M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
NORMAL COPYING This section describes the normal copying procedure. Copying from the reversing automatic document feeder NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4.). I 1-sided copies of 1-sided originals Original Copy 1 Place the originals in the document feeder tray. (page 4-6) 5 Touch the [OK] key. 0 OK 2 Ensure that the 1-sided to 1-sided copy mode is selected. The one-sided to oneORIGINAL 8½x11 sided mode is selected PLAIN when no icon for a two- 5½x8½ sided mode appears in 8½x11 the dashed area on the DUPLEX 8½x11 display. If the 1-sided to 11x17 1-sided copy mode is already selected, steps 3 to 5 are not needed. 3 Touch the [2-SIDED COPY] key. 2-SIDED COPY OUTPUT 4 Touch the [1-sided to 1-sided copy] key. Touch the [1-sided to 1sided copy] key. 6 Ensure that paper of the same size as the originals is automatically selected. (*Note) The selected tray will be AUTO 8½x11 PAPER SELECT highlighted or the message "LOAD xxxxxx PAPER." will appear. If the message appears, 100% load paper in a paper tray with paper of the required size. Even if the message above is displayed, copying can be performed onto the currently selected paper. (*Note) The following requirements must be satisfied. Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, B5 or B5R) are set and the auto paper select function is enabled. If originals of a size other 8½x11 PLAIN than the sizes above are to be copied, manually 8½x14 RECYCLED select the desired paper size by touching the 11x17 PLAIN [PAPER SELECT] key and then touching the desired paper size selection key. The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key. 5-2