Sharp AS241F-BK User Manual - AS221F-BK-AS241F-BK - Page 30

Setup Setup Menu EXPANSION FULL ASPECT RESPONSE IMPROVE LANGUAGE POWER INDICATOR QUICK START OSD TURN OFF OSD LOCK OUT FACTORY RESET Sets the Zoom method. The image is expanded to full screen regardless of the resolution. The image is expanded without changing the aspect ratio. Turns the [RESPONSE IMPROVE] function [ON] or [OFF]. This function may reduce blurring that occurs in some moving images. Selects the language used by the OSD. After selecting language, press the ENTER button. Turns off the LED light on the monitor bezel when [POWER INDICATOR] is set to [OFF]. The compliance marks that are shown when powering on the monitor the first time are not shown when switching inputs. The compliance marks are not shown again unless the AC power cord has been disconnected and reconnected. If you select [ON], it prevents the compliance marks from being shown when powering on the monitor. The OSD menu will stay open as long as it is in use. You can select how long the monitor waits after the last touch to turn off the OSD menu. The preset choices are 5 - 100 seconds by 5-second increments. This control completely locks out access to all of the OSD control functions except for [BRIGHTNESS], [CONTRAST], [VOLUME], and input change. To activate the [OSD LOCK OUT] function, open the OSD menu, select [OSD LOCK OUT], then hold down the ENTER button over 5 seconds and press the EXIT button simultaneously. To deactivate, hold down the EXIT button over 5 seconds and press the ENTER button simultaneously. Selecting [FACTORY PRESET] allows you to reset all OSD control settings back to the default settings except [LANGUAGE]. Information Information Menu INFORMATION Information about the current display resolution and technical data, including the preset timing being used and the vertical frequencies, and indicates the model and serial numbers of your monitor. English−28