Sharp BDHP210U BD-HP210U Operation Manual - Page 45
Software Update
UPC - 074000354920
View all Sharp BDHP210U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
SETTINGS Software Update This function allows software updates by inserting a USB memory device with the update file into the BD STORAGE/SERVICE terminal on this player. • When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC. • The USB memory device must be clear of all files except software update data to allow new software uploading. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-2374277). • When software update data is released, copy the data onto a USB memory device after downloading it to a PC. • Delete unneeded software update data using a PC after the software update process is completed. 1 Insert the USB memory device with the update file into the BD STORAGE/SERVICE terminal on rear of this player. 2 Press SETUP to display the Setup Menu screen. 3 Press a/b/c/d to select "Settings", then press ENTER. 4 Press a/b to select "Software Update", then ENTER. • If you have not yet set the password, go to step 6. 5 Enter the 4-digit number using 0-9. Enter 4-digit password • If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly. Software update file is not detected in the USB memory device. Confirm that you have transferred the file to the USB memory device and retry software update. Confirm that you have inserted the USB memory device into the correct device. OK There is more than one software file in the USB memory device. Confirm that only the software update file is in the USB memory device. OK 8 Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. The picture will temporarily go dark until the software update display appears. Wait several minutes and do not unplug the AC cord. OK 6 Press ENTER to start checking data in the USB memory device. Insert USB memory device containing the software update file. OK 7 During the data checking, "Checking" blinks. Now checking the data in USB memory device. Checking • The current version of this unit software and the version of the update file on the USB memory device are displayed. To update this player software with update file, select "Yes", and press ENTER. Software update file is detected in the USB memory device. Start update? Current Ver. : Update Ver. : Yes **1234567 **1234567 No Now updating * Do not unplug AC cord. Update Version **1234567-2 30% 9 When the software is successfully updated, a screen is displayed indicating that the update process is completed. • If the update has failed, check the file in the USB device and try Software Update again. 10 Press POWER to turn off the player. 11 Remove the USB memory device. Settings 43