Sharp CD-G10000 CD-G10000 Operation Manual - Page 31
Radio
UPC - 074000366107
View all Sharp CD-G10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) CD-G10000 CP-G10000S To recall a memorized station Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station. 1 Perform steps 1 - 3 in "Tuning" on page 30. 2 Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory. To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 Press the PRESET ( or ) button for more than 0.5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the PRESET ( or ) button again when the desired station is located. Radio If the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a pre- set station. When a new station is stored in memory, the station previously memorized for that preset channel number will be erased. Note: The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord become disconnected. To erase entire preset memory 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 While pressing down the button and the X-BASS/DEMO but- ton, press the CLOCK/TIMER button until "TUNER CL" appears. 31