Sharp CD-G15000P CD-G15000 Operation Manual - Page 17
Subwoofer control
![]() |
View all Sharp CD-G15000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Subwoofer control CD-G15000 CP-G15000 Before you turn the system on/off on the main unit, minimize the speaker volume on the main unit and turn the VOLUME control of the subwoofer to "-". Speaker light up dimmer switch The speaker unit surface will light up and blink according to BASS SOUND LEVEL. During STANDBY MODE (DEMO MODE): When subwoofer is turned ON, the subwoofer unit will emit blinking light. During STANDBY MODE (ECHO MODE): When subwoofer is turned ON, no light will be will emitted from the subwoofer unit. Notes: Observe the following to avoid malfunction and sound distortion. Do not set the volume too high on the main unit. The subwoofer may be damaged. Before you switch on/off on the main unit, minimize the volume on the main unit. Unplug the AC power cord when connecting the subwoofer cable. Preparation for Use Power switch Press the POWER ON/OFF button to turn ON the Active Subwoofer. Volume control Turn the VOLUME control clockwise to increase the volume, and turn it counterclockwise to decrease the volume. Crossover frequency control Adjust the high frequency cut-off point. Frequencies higher than the set frequency are removed. To emphasize the bass, turn this control toward 35 Hz and increase the volume. 17
![](/manual_guide/products/sharp-cdg15000-cdg15000-operation-manual-151eeb6/17.png)