Sharp CD-G15000P CD-G15000 Operation Manual - Page 41

Enhancing your system The connection cord is not included. Purchase a commercially available cord as shown below. Game system, VCR, DVD player, etc. To the line output jacks White Red Yellow Yellow White Red Video cable RCA cord (not supplied) (not supplied) TV To video input jack Yellow Video cable (not supplied) ANTENNA FM GND AM 75 OHMS VIDEO OUT REAR SPEAKERS RIGHT LEFT RATED SPEAKER IMPEDANCE : 16 OHMS MIN. Yellow CD-G15000 CP-G15000 Listening to sounds of Game, VCR, DVD, etc. 1 Connect a video game system, VCR, DVD, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) jacks. 2 Connect a TV to the rear VIDEO OUT jack. Switch the TV input to auxiliary. 3 Press the ON/STAND-BY button to turn the power on. 4 Press the GAME/VIDEO button. 5 Play the connected equipment. You can enjoy sounds from the supplied speakers and images on the TV. Note: To prevent noise interference, place the unit away from the television. Auto power on function: When you press any of the following buttons, the unit turns on. GAME/VIDEO button (main unit and remote control): The unit turns on and the "GAME" function is activated. / button on the main unit: The unit turns on and playback of the last function starts (CD, TAPE, TUNER, GAME/VIDEO). To record sounds of Game, VCR etc. 1 Insert a cassette in the TAPE 2 cassette compartment. 2 Press the GAME/VIDEO button. 3 Press the button. 4 Press the / button. 5 Play the game system, VCR, etc. Advanced Features 41