Sharp CD-XP300 Service Manual - Page 13

CD-XP300/CD-XP3300 REMOVING AND REINSTALLING THE MAIN PARTS TAPE MECHANISM SECTION Perform steps 1 to 7 and 8 of the disassembly method to remove the tape mechanism. TAPE 2 Clutch Ass'y Record/Playback Head How to remove the record/playback and erase heads (TAPE 2) (See Fig. 13-1) 1. When you remove the screws (A1) x 2 pcs., the recording/ playback head and three-dimensional head of the erasing head can be removed. Erase Head How to remove the playback head (TAPE 1) (See Fig. 13-2) 1. When you remove the screws (B1) x 2 pcs., the playback head can be removed. How to remove the pinch roller (TAPE 1/2) (See Fig. 13-3) 1. Carefully bend the pinch roller pawl in the direction of the arrow , and remove the pinch roller (C1) x 1 pc., in the direction of the arrow . Note: When installing the pinch roller, pay attention to the spring mounting position. (A1)x2 Ø2x9mm Figure 13-1 TAPE 1 Clutch Ass'y Playback Head How to remove the belt (TAPE 2) (See Fig. 13-4) 1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc. (B1)x2 Ø2x9mm Figure 13-2 How to remove the belt (TAPE 1) (See Fig. 13-4) 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc. How to remove the motor (See Fig. 13-5) 1. Remove the screws (F1) x 2 pcs., to remove the motor. Motor Pinch Roller (C1)x1 Pull Pinch Roller Pawl Figure 13-3 (F1)x2 Ø 2.6x5mm Clutch Ass'y TAPE 2 FF/REW Belt (D2)x1 Motor Motor TAPE 2 Main Belt (D1)x1 TAPE 1 Main Belt (E1)x1 Main Belt (D1)x1 Main Belt (E1)x1 TAPE 1 FF/REW Belt (E2)x1 Figure 13-5 - 13 - Figure 13-4