Sharp CV-2P10SC CV-2P10SC Operation Manual - Page 18
Pre-operation Checks - remote
View all Sharp CV-2P10SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PRE-OPERATION CHECKS POWER PLUG CHECK This unit uses a fused power plug. Always check the power plug before use. 1 Press the RESET button. 2 Insert the power plug into the wall sock- et. 3 Press the TEST button. You will hear a CLICK if the circuit breaker is functioning correctly. 4 Press the RESET button until you hear another CLICK. The circuit breaker is activated, power is supplied, and the unit is now ready for use. CAUTION: Do not attempt to use the unit if the above procedure cannot be performed. Disconnect the power plug and call for service. LOADING BATTERIES 1 Remove the battery cover. 2 Insert two batteries. (AAA(R03)) • Make sure the (+) and (-) polarities are correctly aligned. • Lines will appear on the display when batteries are properly installed. 3 Reattach the battery cover. 4 Press the RESET button using a thin pointed implement. NOTES: • The battery life is approximately 1 year in normal use. • When replacing the batteries, always change both and use the same type. • If you will not be using the unit for a long time, re- move the batteries from the remote control. EN-16 CV-2P10SC_en.indd 16 TEST RESET Battery cover 11.3.22 11:00:15 AM