Sharp CV-2P10SX Operation Manual - Page 16
Installation And Removal Of Exhaust Hose
View all Sharp CV-2P10SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLATION AND REMOVAL OF EXHAUST HOSE Installation of the exhaust hose 1 Attach the window adapter to the exhaust hose. Extend one end of the exhaust hose and insert it into the window adapter, and turn it (approx. three times) until it stops. Make sure they are securely attached. Window adapter Extend Exhaust hose 2 Attach the exhaust hose to the unit. Insert the two projections into the two holes on the unit, and firmly attach them to each other until they click. Exhaust hose Projection Hole 3 Slide and open the exhaust cover on the window panel, and attach the window adapter. (Double-hung sash window) Surface of window adapter marked "TOP" should be at the top. (Sliding sash window) Surface of window adapter marked "TOP" should be on the window frame side. Exhaust cover "TOP" The exhaust hose should be as short as possible for operational efficiency; however, it must not be twisted or bent. Unacceptable Acceptable Acceptable CV-2P13SX_en.indd 14 EN-14 11.3.3 5:58:18 PM