Home » Sharp Manuals » Clock Radios & Alarm Clocks » Sharp DK-A1 » Manual Viewer

Sharp DK-A1 DK-A1 DK-A1BK Operation Manual - Page 2

Special Notes - dk a1bk

UPC - 074000368576

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

DK-A1 SPECIAL NOTES DK-A1BK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985, 5,740,317, 5,777,992, 5,878,080 or 5,960,037. Important Instruction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. FOR YOUR RECORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. Please retain this information. Model number Serial number Date of purchase Place of purchase 2

Section	Page
DK-A1 EN 01-30.fm .pdf	2
Important Instruction	2
SPECIAL NOTES	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	2
<GRAPHIC>	3
IMPORTANT SAFETY INSTRUCTIONS	3
<GRAPHIC>	3
<GRAPHIC>	4
IMPORTANT SAFETY INSTRUCTIONS (continued)	4
IMPORTANT SAFETY INSTRUCTIONS (continued)	4
<GRAPHIC>	4
<GRAPHIC>	5
<GRAPHIC>	5
<GRAPHIC>	5
Supply of this product does not convey a license nor imply any right to distribute content create...	5
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.	5
General Information	6
Precautions	6
n General	6
<TABLE>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Use the unit on a firm, level surface free from vibration.	6
l Use the unit on a firm, level surface free from vibration.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...	6
l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...	6
<GRAPHIC>	6
l Do not place anything on top of the unit.	6
l Do not place anything on top of the unit.	6
l Do not place anything on top of the unit.	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely lo...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...	6
<TABLE>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l In case of an electrical storm, unplug the unit for safety.	6
l In case of an electrical storm, unplug the unit for safety.	6
<GRAPHIC>	6
l Do not lift the unit by holding left or right side panel, it may cause the unit damage or broken.	6
l Do not lift the unit by holding left or right side panel, it may cause the unit damage or broken.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...	6
l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...	6
l The AC power plug is used as disconnect device and shall always remain readily operable.	6
<GRAPHIC>	6
<TABLE>	6
<TABLE BODY>	6
<TABLE ROW>	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...	6
<GRAPHIC>	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
l This unit should only be used within the range of 41F - 95F (5C - 35C).	6
The voltage used must be the same as that specified on this unit. Using this product with a highe...	6
n Volume control	6
The sound level at a given volume setting depends on speaker efficiency, location and various oth...	6
General Information	7
Controls and indicators	7
<GRAPHIC>	7
<GRAPHIC>	7
Reference page	7
Reference page	7
Reference page	7
1. iPod Dock 15	7
1. iPod Dock 15	7
1. iPod Dock 15	7
2. POWER ON/STAND-BY Button 12, 17, 23	7
2. POWER ON/STAND-BY Button 12, 17, 23	7
2. POWER ON/STAND-BY Button 12, 17, 23	7
3. Clock Button 13	7
3. Clock Button 13	7
3. Clock Button 13	7
4. iPod Button 14, 15	7
4. iPod Button 14, 15	7
4. iPod Button 14, 15	7
5. Alarm Indicator 19	7
5. Alarm Indicator 19	7
5. Alarm Indicator 19	7
6. Auxiliary Button 21	7
6. Auxiliary Button 21	7
6. Auxiliary Button 21	7
7. Snooze/Dimmer Button 12, 19, 23	7
7. Snooze/Dimmer Button 12, 19, 23	7
7. Snooze/Dimmer Button 12, 19, 23	7
8. Tuner Button 17	7
8. Tuner Button 17	7
8. Tuner Button 17	7
9. Remote Sensor 11	7
9. Remote Sensor 11	7
9. Remote Sensor 11	7
10. Alarm Button 19	7
10. Alarm Button 19	7
10. Alarm Button 19	7
11. Alarm ON/OFF Button 19	7
11. Alarm ON/OFF Button 19	7
11. Alarm ON/OFF Button 19	7
12.	7
12.	7
12.	7
13. Play/Pause Button 14, 16	7
13. Play/Pause Button 14, 16	7
13. Play/Pause Button 14, 16	7
14. Skip Down, Tuner Preset Down Button 13, 16, 18	7
14. Skip Down, Tuner Preset Down Button 13, 16, 18	7
14. Skip Down, Tuner Preset Down Button 13, 16, 18	7
15. Skip Up, Tuner Preset Up Button 13, 16, 18	7
15. Skip Up, Tuner Preset Up Button 13, 16, 18	7
15. Skip Up, Tuner Preset Up Button 13, 16, 18	7
16. EQ Button 12	7
16. EQ Button 12	7
16. EQ Button 12	7
17. Volume Down Button 12	7
17. Volume Down Button 12	7
17. Volume Down Button 12	7
18. Volume Up Button 12	7
18. Volume Up Button 12	7
General Information	8
Controls and indicators (continued)	8
Controls and indicators (continued)	8
<GRAPHIC>	8
n Display	8
Reference page	8
Reference page	8
Reference page	8
1. Alarm Indicator 19	8
1. Alarm Indicator 19	8
1. Alarm Indicator 19	8
2. Sleep Indicator 20	8
2. Sleep Indicator 20	8
2. Sleep Indicator 20	8
3. iPod Indicator 14	8
3. iPod Indicator 14	8
3. iPod Indicator 14	8
4. Aux Indicator 21	8
4. Aux Indicator 21	8
4. Aux Indicator 21	8
5. FM Stereo Mode Indicator 17	8
5. FM Stereo Mode Indicator 17	8
5. FM Stereo Mode Indicator 17	8
6. FM Stereo Receiving Indicator 17	8
6. FM Stereo Receiving Indicator 17	8
6. FM Stereo Receiving Indicator 17	8
7. Summer Time Indicator 13	8
7. Summer Time Indicator 13	8
7. Summer Time Indicator 13	8
n Rear panel	8
Reference page	8
Reference page	8
Reference page	8
1. AM Loop Antenna Terminal 10	8
1. AM Loop Antenna Terminal 10	8
1. AM Loop Antenna Terminal 10	8
2. AM Antenna Ground Terminal 10	8
2. AM Antenna Ground Terminal 10	8
3. FM 75 Ohms Antenna Jack 10	8
3. FM 75 Ohms Antenna Jack 10	8
4. Auxiliary Input Jacks 21	8
4. Auxiliary Input Jacks 21	8
5. Headphone Jack 21	8
5. Headphone Jack 21	8
6. Video Out Jack 10	8
6. Video Out Jack 10	8
7. Summer Time Switch 13	8
7. Summer Time Switch 13	8
8. AC Input 10	8
8. AC Input 10	8
General Information	9
<GRAPHIC>	9
<GRAPHIC>	9
Reference page	9
Reference page	9
Reference page	9
1. Remote Control Transmitter 11	9
1. Remote Control Transmitter 11	9
2. Function Button 12	9
2. Function Button 12	9
2. Function Button 12	9
2. Function Button 12	9
2. Function Button 12	9
4. Volume Up and Down Buttons 12	9
4. Volume Up and Down Buttons 12	9
4. Volume Up and Down Buttons 12	9
4. Volume Up and Down Buttons 12	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18	9
5. Skip Down, Tuner Preset Down Button 13, 16, 18	9
6. Play Mode Button 16	9
6. Play Mode Button 16	9
6. Play Mode Button 16	9
7. Tuning Up and Down Buttons 17	9
7. Tuning Up and Down Buttons 17	9
8. Memory Button 18, 20	9
8. Memory Button 18, 20	9
9. Clock Button 13	9
9. Clock Button 13	9
10. Snooze/Dimmer Button 12, 19	9
10. Snooze/Dimmer Button 12, 19	9
11. Sleep Button 20	9
11. Sleep Button 20	9
12. Alarm Button 19	9
12. Alarm Button 19	9
13. Skip Up, Tuner Preset Up Button 13, 16, 18	9
13. Skip Up, Tuner Preset Up Button 13, 16, 18	9
14. Display Button 13, 16	9
14. Display Button 13, 16	9
15. Play/Pause Button 14, 16	9
15. Play/Pause Button 14, 16	9
16. E Sound/Demo Button 10, 12	9
16. E Sound/Demo Button 10, 12	9
17. Clear Button 18	9
17. Clear Button 18	9
18. EQ Button 12	9
18. EQ Button 12	9
Before using remote control, please remove plastic shield at battery holder.	9
<TABLE>	9
<TABLE BODY>	9
<TABLE ROW>	9
<GRAPHIC>	10
System connections	10
<TABLE>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
Make sure to unplug the AC power cord before any connections.	10
<TABLE ROW>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
Supplied FM antenna:	10
Supplied FM antenna:	10
Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direct...	10
<GRAPHIC>	10
<GRAPHIC>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
< Assembling >	10
< Assembling >	10
< Attaching to the wall >	10
< Attaching to the wall >	10
<TABLE ROW>	10
<GRAPHIC>	10
Wall	10
Wall	10
Screws (not supplied)	10
Screws (not supplied)	10
n Outdoor FM antenna	10
Use an outdoor FM antenna if you require better reception. Consult your dealer.	10
<GRAPHIC>	10
<GRAPHIC>	10
n Connecting iPod to TV	10
iPod photo and 5th Generation iPod with photo and video can be viewed by connecting to TV/monitor...	10
<GRAPHIC>	10
<GRAPHIC>	10
After checking all the connections have been made correctly, plug the AC power cord of this unit ...	10
<GRAPHIC>	10
<GRAPHIC>	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...	10
<TABLE>	10
<TABLE>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
n Demonstration mode	10
n Demonstration mode	10
To cancel the demonstration mode:	10
To cancel the demonstration mode:	10
When the unit is in the demonstration mode, press the E SOUND/DEMO button. The unit will enter th...	10
<GRAPHIC>	10
<TABLE>	10
<TABLE BODY>	10
<TABLE ROW>	10
To return to the demonstration mode: When the unit is in the power stand-by mode, press the E SOU...	10
To return to the demonstration mode:	10
To return to the demonstration mode:	10
<TABLE ROW>	10
Note: When the power is on, the E SOUND/DEMO button can be used to select the E SOUND mode.	10
Note:	10
Note:	10
Preparation for Use	11
Remote control	11
n Battery installation	11
<TABLE>	11
<TABLE>	11
<TABLE BODY>	11
<TABLE ROW>	11
1	11
1	11
1	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
While pushing the locking tab toward the center of the remote control, slide out the battery holder.	11
<GRAPHIC>	11
2	11
2	11
2	11
Remove the old battery from the battery holder, insert the new battery and then slide the battery...	11
Remove the old battery from the battery holder, insert the new battery and then slide the battery...	11
<TABLE ROW>	11
<GRAPHIC>	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Do not use rechargeable battery (nickel-cadmium battery, etc.).	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Installing the battery incorrectly may cause the unit to malfunction.	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
l Keep the remote control away from moisture, heat, shock, and vibrations.	11
n Test of the remote control	11
Check the remote control after checking all the connections (see page 10).	11
Point the remote control directly at the remote sensor on the unit.	11
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music.	11
<GRAPHIC>	11
<GRAPHIC>	12
General control	12
<GRAPHIC>	12
<GRAPHIC>	12
Press the ON/STAND-BY button to turn the power on.	12
<TABLE>	12
<TABLE>	12
<TABLE BODY>	12
<TABLE ROW>	12
After use:	12
After use:	12
After use:	12
Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.	12
<TABLE ROW>	12
Press the SNOOZE/DIMMER button to adjust the brightness of the display and LED.	12
n Volume auto fade-in	12
n Volume auto fade-in	12
If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16...	12
<TABLE>	12
<TABLE>	12
<TABLE>	12
<TABLE BODY>	12
<TABLE ROW>	12
n Volume control	12
n Volume control	12
Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...	12
Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...	12
<GRAPHIC>	12
The special sound created to enhance iPod sound as sound been produced by CD-Audio quality. When ...	12
n Equalizer	12
When the EQ button is pressed, the current mode setting will be displayed. To change to a differe...	12
n Function	12
When the FUNCTION button on remote control is pressed, the current function will change to differ...	12
<GRAPHIC>	12
<GRAPHIC>	12
The backup function protect the memorized function mode for a few days should there be a power fa...	12
Basic Operation	13
Setting the clock	13
<GRAPHIC>	13
<GRAPHIC>	13
<TABLE>	13
<TABLE>	13
<TABLE BODY>	13
<TABLE ROW>	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13
1 Press the CLOCK button for more than 2 seconds.	13
<TABLE ROW>	13
2 Press the or button to select 12-hour or 24-hour display and then press the CLOCK button.	13
2 Press the	13
2 Press the	13
2 Press the	13
<TABLE ROW>	13
<GRAPHIC>	13
“12:00 AM”	13
“12:00 AM”	13
<GRAPHIC>	13
<GRAPHIC>	13
The 12-hour display will appear.	13
<TABLE ROW>	13
(12:00 AM - 11:59 PM)	13
(12:00 AM - 11:59 PM)	13
<TABLE ROW>	13
“0:00 AM”	13
“0:00 AM”	13
<GRAPHIC>	13
<GRAPHIC>	13
The 12-hour display will appear.	13
<TABLE ROW>	13
(0:00 AM - 11:59 PM)	13
(0:00 AM - 11:59 PM)	13
<TABLE ROW>	13
“0:00”	13
“0:00”	13
<GRAPHIC>	13
<GRAPHIC>	13
The 24-hour display will appear.	13
<TABLE ROW>	13
(0:00 - 23:59)	13
(0:00 - 23:59)	13
<TABLE ROW>	13
3 Press the or button to adjust the hour and then press the CLOCK button.	13
3 Press the	13
3 Press the	13
3 Press the	13
<TABLE ROW>	13
<GRAPHIC>	13
Press the or button once to advance the time by 1hour. Hold it down to advance continuously.	13
Press the	13
<TABLE>	13
<TABLE>	13
<TABLE BODY>	13
<TABLE ROW>	13
4 Press the or button to adjust the minutes and then press the CLOCK button.	13
4 Press the	13
4 Press the	13
4 Press the	13
<GRAPHIC>	13
<TABLE ROW>	13
Press the or button once to advance the time by 1minute. Hold it down to change the time in 5-mi...	13
Press the	13
[When the unit is in the stand-by mode or in demonstration mode.]	13
Press the CLOCK button to enter the clock function.	13
[When the power is on]	13
Press DISPLAY button on remote control to toggle between the function information and clock display.	13
l The clock will continue counting for 8 hours should there be a power failure or the AC power co...	13
l The “CLOCK ADJ” will appear or time will flash to confirm the time display when the AC power su...	13
Perform “Setting the clock” from step 1. Step 2 (selecting the 12- hour or 24-hour display) will ...	13
<TABLE>	13
<TABLE>	13
<TABLE BODY>	13
<TABLE ROW>	13
1	13
1	13
Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 23 for det...	13
Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 23 for det...	13
<TABLE ROW>	13
2	13
2	13
Perform “Setting the clock” from step 1.	13
Perform “Setting the clock” from step 1.	13
<TABLE>	13
<TABLE>	13
<TABLE BODY>	13
<TABLE ROW>	13
1	13
1	13
Slide the ST switch to +1 to advance the time 1 hour. indicator will appear.	13
Slide the ST switch to +1 to advance the time 1 hour.	13
<TABLE ROW>	13
2	13
2	13
Slide the ST switch to -1 to turn the clock back 1 hour.	13
Slide the ST switch to -1 to turn the clock back 1 hour.	13
iPod	14
Listening to the iPod	14
Supported iPod models:	14
l iPod nano (software 1.0 above)	14
l iPod nano (software 1.0 above)	14
l iPod nano (software 1.0 above)	14
l iPod nano (software 1.0 above)	14

Match case Limit results 1 per page

DK-A1

DK-A1BK

Important Instruction

SPECIAL NOTES

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s en-

closure that may be of sufficient magnitude

to constitute a risk of electric shock to per-

sons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and main-

tenance (servicing) instructions in the lit-

erature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's

attention to Article 820-40 of the National Electrical Code that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

NOTE

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful in-

terference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to ra-

dio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING

FCC Regulations state that any unauthorized changes or modifications

to this equipment not expressly approved by the manufacturer could void

the user's authority to operate this equipment.

FOR YOUR RECORDS

For your assistance in reporting this unit in case of loss or theft,

please record below the model number and serial number which

are located on the rear of the unit.

Please retain this information.

Model number

.......................................................

Serial number

.......................................................

Date of purchase

.......................................................

Place of purchase

.......................................................