Sharp DK-A10BK DK-A10 DK-A10BK Operation Manual - Page 24

DK-A10 Listening to the radio (continued) DK-A10BK Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in "Tuning" on page 23. 2 Press the MEMORY button to enter the preset tuning saving mode. 3 Within 30 seconds, press the or button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that station in memory. To recall a memorized station Press the or desired station. button for less than 0.5 seconds to select the To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 Press the or button for more than 0.5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the or button again when the desired station is located. Radio If the "MEMORY" and preset number indicators disappear before the station is memorized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorized for that preset channel number will be erased. Note: The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord becomes disconnected. FUNCTION VOL CLOCK SLEEP SNOOZE/ DIMMER ALARM FOLDER PLAY MODE TUNING DISPLAY E SOUND /DEMO CLEAR EQ MEMORY To erase entire preset memory 1 Press and hold the CLEAR button for more than 3 seconds. "TUN CLEAR" will be displayed. 2 Within 10 seconds, press the MEMORY button. "COMPLETE" will be displayed. 24