Sharp DT 510 Operation Manual - Page 17
Quick Start, Connect the projector to the video equipment and plug the power
UPC - 074000365179
View all Sharp DT 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Quick Start This section shows the basic operation (projector connecting with the video equipment). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the video equipment is explained using one ex- ample. 3 STANDBY/ON 8 button 8 STANDBY button 5 INPUT buttons 3 ON button 5 INPUT 4 button 7 KEYSTONE button 6 Focus ring 6 Zoom ring 6 HEIGHT ADJUST lever 7 Adjustment (P/R/O/Q) buttons 7 ENTER button 1. Place the projector facing a wall or a screen _P. 18 2. Connect the projector to the video equipment and plug the power cord into the AC socket of the projector _PP. 22-28 To INPUT 4 terminal AC socket Connect the audio output of any video devices to an appropriate audio device. 3. Remove the lens cap and turn the projector on _P. 28 On the On the remote projector control 16