Sharp DT 510 Operation Manual - Page 51

Using the "Options" Menu (Continued) Menu operation n Page 41 2 Selecting the Transmission Speed (RS-232C) 4 Fan Mode Setting This function changes the fan rotation speed. Serviceman only When using the RS-232C terminal, set the baud rate of the projector to the same baud rate as the computer. Selectable items Description 9600bps Transmission speed is slow. P R 115200bps Transmission speed is rapid. Selectable items Normal High Description Suitable for normal environments. Select this when using the projector at altitudes of approximately 4,900 feet (1,500 meters) or more. When "Fan Mode" is set to "High", the fan rotation speeds up, and the fan noise becomes louder. 5 Returning to the Default Settings 3 Reducing the Power Consumption When the Power Is in Standby Mode When "STANDBY Mode" has been set to "Standard", the RS-232C function is activated and power is consumed even in standby mode. It is recommended that "STANDBY Mode" be set to "Eco" when it is not being used. This reduces power consumption when the projector is in standby mode. Use "All Reset" to initialize all the adjustments you have made to the default settings. Note The following items cannot be initialized. • "Fine Sync" menu - Special Modes • "Options1" menu - Lamp Timer (Life) - Language Selectable items Description Standard The RS-232C function is activated even if the projector is in standby mode. Eco The RS-232C function is switched off when the projector is in standby mode. Note • When you want to control the projector using the RS-232C function, set to "Standard". 6 Selecting the On-screen Display Language The projector can switch the on-screen display language among 11 languages. English Deutsch Español Nederlands Français Italiano Svenska Português 50