Sharp DT300 DT-300 Operation Manual - Page 21

Connecting the Projector to Other Devices Connecting to Video Equipment with the DVI Output Terminal Using a DVI Cable (DIGITAL INPUT) Use the DVI cable when connecting video equipment with the DVI output terminal such as DVD players and DTV decoders to DIGITAL INPUT terminal. 1 Slide the "DIGITAL INPUT TYPE" switch on the back terminal board to "VIDEO". 2 Connect the DVI cable to the DIGITAL INPUT terminal. 3 Connect the other end to the corresponding terminal on the DVD player or DTV decoder. • Secure the connectors by tightening the thumbscrews. Note • Select DIGITAL INPUT mode when connecting to video equipment with the digital output terminal. (See page 31.) • Make sure to turn both the projector and the video equipment off before switching the "DIGITAL INPUT TYPE" switch and connecting. Optional accessory DVI cable Type: AN-C3DV (9'10'' (3.0 m)) To DIGITAL INPUT terminal DIGITAL INPUT TYPE switch DVI cable (sold separately) To DVI digital output terminal DVD player or DTV decoder -20