Sharp DT300 DT-300 Operation Manual - Page 48

Picture Setting Function This function stores all items set in "Picture". Five settings can be stored separately in "Memory 1" to "Memory 5". Each stored setting is reassigned to each input mode (INPUT 1 to INPUT 4 and DIGITAL). Even when the input mode or signal is changed, you can easily select optimal settings from the stored settings. I Storing the Adjustment Values for Each Memory Number Select "Picture Setting" on the "Picture" menu and the memory location where you want to store the settings. Then adjust the setting items on the "Picture" menu. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description Memory 1-5 Memory OFF Settings of all items in "Picture" can be stored for the respective input modes. The stored settings can be selected in any input modes. Besides "Memory 1" to "Memory 5", other settings on the "Picture" menu can be stored for each input mode. The settings stored in "Memory OFF" cannot be applied when another input mode is selected. I Applying the Stored Settings If you want to apply the stored settings on the "Picture" menu, select "Picture Setting" on the "Picture" menu and the memory location where you have stored the settings. Note • This function can be operated using the on the projector or on the remote control, as well as the OSD menu screen. Each time or is pressed, the memory number changes as shown below. Memory 1 Memory 2 Memory 3 Memory OFF Memory 5 Memory 4 On-screen Display PICTURE SETTING button PICTURE SETTING button -47 Adjustments and Settings