Sharp DV-SL20U DV-SL20U Operation Manual - Page 10

PLAYING A DISC Basic Playback Title Menu DVD CD DVD-RW DVD Getting started VR mode • Turn on the power of the TV, amplifier and any other com- ponents which are connected to the DVD. • Make sure the TV and audio receiver (commercially avail- able) are set to the correct channel. 1 Press POWER. • "P-ON" will appear briefly on the display panel. 2 Press OPEN/CLOSE to open disc loading tray. 1 Press TITLE. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press Arrow ( L/ K/ B/ s ) to select an item, and ENTER to confirm selection. • Playback will begin at the selected Title. CALLING UP A MENU SCREEN DURING PLAYBACK 3 Place the chosen disc in the tray, • Press MENU to call up the DVD main menu. with the label facing up. • Press TITLE to call up the title menu. 4 Press PLAY. • The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. • When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to "TITLE MENU". 5 Press STOP to stop playback. NOTES: • A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. • With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. • During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. • A DVD-RW disc recorded in the VR mode may freeze momentarily during playback depending on how the playlist was made and edited (deleted titles, repeated recording). NOTE: • Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. Step by Step Playback DVD DVD-RW 1 During playback, press STILL/PAUSE. VR mode • Playback will pause and sound will be muted. 2 The disc goes forward by one frame each time STILL/PAUSE is pressed. 3 To exit step by step playback, press PLAY. Resume / Stop DVD CD 1 During playback, press STOP. • Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the point at which playback was stopped. General Features DVD may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use Arrow ( L/ K/ B/ s ) to highlight your selection in the DVD main menu and press ENTER to confirm. • To cancel resume, press STOP again. • To stop playback, press STOP twice from playback mode. Playing the disc recorded in VR mode (Video Recording format) NOTE: • Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. DVD-RW VR mode You can choose ORIGINAL or PLAYLIST when you play the disc which had set the PLAYLIST. 1 Press MENU in stop mode. Pause • The current setting screen will appear. • Pressing MENU during playback is not valid. DVD CD MP3 DVD-RW VR mode 1 During playback, press STILL/PAUSE. • Playback will pause and sound will be muted. ORIGINAL 1 PLAYLIST1 2 PLAYLIST2 3 PLAYLIST3 4 PLAYLIST4 5 PLAYLIST5 6 PLAYLIST6 PLAYLIST 2 To continue playback, press PLAY. 2 Press sor Bto select ORIGINAL or PLAYLIST. Disc Menus • PLAYLIST will not be displayed when it has not been made. DVD • Resume playback will not be possible if you change the setting. 1 Press MENU. 3 Press Kor Lto select a title, then press ENTER. • The DVD main menu will appear. • Playback will start. 2 If the feature is not available, symbol may NOTES: appear on the TV screen. • [ORIGINAL]: A list of titles which are recorded with a DVD 3 If disc menu is available on the disc, audio lan- recorder. guage, subtitle options, chapters for the title and other options will appear for selection. [PLAYLIST]: A list of titles which is made based on the ORIGINAL list for editing. • With discs recorded in VR mode, changing the audio 4 Press Arrow ( L/ K/ B/ s ) to select an item, and (MAIN, SUB or MAIN+SUB) is effective only when ENTER to confirm selection. using an analogue connection. Although you may be able to change the settings of the on-screen display, it is not - 10 - affect the sound when using a digital connection. EN