Sharp FO-2950M FO-2950M Operation Manual - Page 62
Direct Keypad Dialing
View all Sharp FO-2950M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Sending a Fax by Automatic Dialing Direct Keypad Dialing You can also enter a full number with the number keys and then press the START key to begin dialing. You can use this method to dial a full number when you don't need to speak to the other party before faxing. 1 Load the document(s). (Note: If desired, you can load the document after dialing in Step 2, below.) • SEND READY will appear in the display. • Set the resolution and/or contrast if desired. RESOLUTION 2 Enter the number of the receiving machine by pressing the numeric keys. 232 • If a pause is required between any 4567 of the digits to access a special service or an outside line, press the (Example) REDIAL key (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row. 3 Check the display. If the number of the receiving machine shown is correct, press the START key. • If it is not correct, press the STOP key to backspace and clear one digit at a time, and then re-enter the correct digit(s). START 60